Wireless Network Security: 7 Simple Tips

Datamation content and product recommendations are editorially independent. We may make money when you click on links to our partners. Learn More.

These days wireless networking products are so ubiquitous and inexpensive
that just about anyone can set up a WLAN in a matter of minutes with less than
$100 worth of equipment. This widespread use of wireless networks means that
there may be dozens of potential network intruders lurking within range of your
home or office WLAN.

Most WLAN hardware has gotten easy enough to set up that many users
simply plug it in and start using the network without giving much thought
to security. Nevertheless, taking a few extra minutes to
configure the security features of your wireless router or access
point is time well spent. Here are some of the things you can do to
protect your wireless network:

1) Secure your wireless router or access point administration
interface
Almost all routers and access points have
an administrator password that’s needed to log into the device
and modify any configuration settings. Most devices use a weak default
password like “password” or the manufacturer’s name, and some don’t
have a default password at all. As soon as you set up a new WLAN
router or access point, your first step should be to change the default password
to something else. You may not use this password very often, so be sure to write
it down in a safe place so you can refer to it if needed. Without it,
the only way to access the router or access point may be to reset it to
factory default settings which will wipe away any configuration changes you’ve
made.

2) Don’t broadcast your SSID
Most WLAN access points
and routers automatically (and continually) broadcast the network’s name,
or SSID (Service Set IDentifier). This makes setting up wireless clients
extremely convenient since you can locate a WLAN without having to know what
it’s called, but it will also make your WLAN visible to
any wireless systems within range of
it. Turning off SSID broadcast for your network makes
it invisible to your neighbors and passers-by (though it will still be
detectible by WLAN “sniffers”).

3)Enable WPA encryption instead of WEP
802.11’s WEP (Wired
Equivalency Privacy) encryption has well-known weaknesses that make it
relatively easy for a determined user with the right equipment to crack the
encryption and access the wireless network. A better way to protect your WLAN is
with WPA (Wi-Fi Protected Access). WPA provides much better protection
and is also easier to use, since your password characters aren’t limited
to 0-9 and A-F as they are with WEP. WPA support is built
into Windows XP (with the latest Service Pack) and virtually all
modern wireless hardware and operating systems. A more recent version,
WPA2, is found in newer hardware and provides even stronger encryption, but
you’ll probably need to download an XP patch in order to use
it.

Read the rest at Practically Networked.